Wiki-GuedeL

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
<color #22b14c>**Configuration for using the Canon Pixma MX925**</color> \\ 


====== Fedora 30 ======

===== Printing over the LAN =====

==== For gnome ====
  * login into cups: http://localhost:631 as ''root''
  * => add a printer
  * choose the network printer (''Imprimantes réseaux découvertes'')
  * tick ''shared printer''
  * choose the driver ''Guteprint simplified''

  * into the graphical interface of gnome for printers, ''Canon_MX920_series + Guteprint simplified'' should be already present


==== LXDE ====
Aucune config particulière: via l'interface d'admin web => reconnaissance de l'imprimante via l'IP => installation du pilote "Guteprint simplifié"

==== Print on film for over-head projector ====
=> Select "Glossy Photo paper" for paper typ.

===== Scanning over the LAN =====

==== Needed packages ====
<code>$ sudo dnf install sane-backends sane-backends-drivers-scanners</code>
Then ''xsane'' and ''simple-scan'' can recognize the scanner


==== Drivers from Canon ====
Procedure to install the proprietary drivers:
  * download the archive containing the rpm's from the Canon site
  * extract the archive
  * go into the extracted folder of the archive
  * <code>$ sudo ./install.sh</code> If there is a dependancy issue: <code>$ dnf provides libpangox-1.0.so.0
Vérification de l'expiration des métadonnées effectuée il y a 1:47:35 sur Tue May 10 07:46:00 2016.
pangox-compat-0.0.2-6.fc23.i686 : Compatibility library for pangox
Dépôt               : fedora

$ sudo dnf install pangox-compat</code>
  * ''simple-scan'' and ''xsane should'' allow to select the printer as a scanning source.
  * other way to scan: "scangearmp" to run the application.







====== Previous versions ======

===== Printing over the LAN =====
  * check that cups is started and enabled
  * install ''cups-bjnp''
  * connect to the web interface of cups: [[http://localhost:631/]] and login as a user with sudo permissions.
    * add a new printer. The LAN printer should be present into the selection list.
    * as driver select ''Canon PIXMA MX925 - CUPS+Gutenprint v5.2.11 Simplified''
The printer should be now available.\\
 \\
__Issues:__ \\ 
Sometimes the printer gets the status "printer not reachable" => restart CUPS: ''systemctl restart cups.service''

===== Update 30.06.19 =====
  * Search <code>lpd://IP.of.the.printer/PASSTHRU</code>
  * as driver select ''Canon PIXMA MX925 - CUPS+Gutenprint v5.2.11 Simplified''