Wiki-GuedeL

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
{{howhard>3}}
====== Configuration of my Fedora23 XFCE ======

===== Authentication on the SME-server =====
[[Welcome:Duo client-server:Authentication client Fedora on SME-server via sssd ldap]]

===== SSH connection to the SME and mounting the SME on the Fedora =====
[[Welcome:Duo client-server:Connection SSH Fedora 22 - SME|Connection SSH of the Fedora 22 from the SME]]

===== Installation of supplementary repositories: =====
  *Installation of both free and non-free repos of RPMFusion:<code>
su -c 'dnf install http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm \
http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm'</code>

===== Small settings =====
==== Midori ====
Midori, instead of Firefox, can't manage the certificates.
Therefore, the management system of Gnome for the certificates as to be enabled: \\
''Applications-->Parameters-->Session and start'' \\
Then go to ''advanced'' and tick on "enable GNOME services by start" \\
Reboot

==== Icons for shortcuts on the desktop ====
are here <code>/usr/share/oxygen/32x32/</code>

==== Add general packages ====
<code>sudo dnf install dia xsane gimp numlockx wget gvfs-smb darktable gvfs-mtp xscreensaver unetbootin</code>

==== Install libre-office ====
<code>sudo dnf install libreoffice-calc libreoffice-draw libreoffice-impress libreoffice-langpack-fr libreoffice-writer </code>

==== Multimedia ====
  *Installation of xfce4-volumed to get control about the audio volume <code>
dnf install xfce4-volumed</code>
  *Replace lxmusic through rhythmbox <code>
sudo dnf remove lxmusic
sudo dnf install rhythmbox </code>


==== Enable rc.local ====
  *create and configure the file /etc/rc.d/rc.local and give execution permissions (chmod 755)<code>
sudo nano /etc/rc.d/rc.local </code> and enter in it: <code>
#!/bin/bash </code> and then <code>sudo chmod +x /etc/rc.d/rc.local </code>
  *Start the service rc.local: <code>
sudo systemctl start rc-local.service 
sudo systemctl enable rc-local.service 
sudo systemctl status rc-local.service </code>

==== Enable the Wake-on-Lan ====
  *Instal «ethtool» <code>
sudo dnf install ethtool</code>
  *Find the name of the interface you want to "wake up": <code>
ifconfig</code>
  *Check if the WOL is active / make it active:<code>
    sudo ethtool <my_interface> </code> should / must give ''Wake-on: g'' to have the WOL active. ''Wake-on: d'' means «disactive». \\ Then add in /etc/sysconfig/network-scripts/ifcfg-my_interface:<code>
    ETHTOOL_OPTS="wol g"</code>
  *Add in /etc/rc.d/rc.local:<code>
    /usr/sbin/ethtool -s enp5s0 wol g </code>
  *Restart. The WOL should now work (''ethtool'' returns ''Wake-on: g'')
<note tip>Don't forget to configure the Bios to support the WOL too!!</note>
==== Enable automatically the numeric pad ====
Use and configure numlockx:
  *for the sessions: add "greeter-setup-script=/usr/bin/numlockx on" in the section [seatDefaults] of the file <code>/etc/lightdm/lightdm.conf </code>
  *for the terminals, add following in /etc/rc.d/rc.local <code>
# Turn Numlock on for the TTYs: 
for tty in /dev/tty[1-6]; do 
/usr/bin/setleds -D +num < $tty 
done </code>

==== Installation of the polices M$: «msttcorefonts»: ====
Download follwing rpm and install localy:<code>
wget ftp://fr2.rpmfind.net/linux/sourceforge/p/po/postinstaller/fedora/releases/23/x86_64/msttcorefonts-2.5-2.fc23.noarch.rpm 
sudo dnf install msttcorefonts-2.5-2.fc23.noarch.rpm  </code>

==== Installation of a Flash-player: ====
<code>
sudo rpm -ivh http://linuxdownload.adobe.com/adobe-release/adobe-release-x86_64-1.0-1.noarch.rpm 
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-adobe-linux 
sudo dnf install flash-plugin </code>

==== Wallpapers on the desktop ====
[[Welcome:Fedora:Wallpapers on desktop|Wallpapers on desktop:]]

==== Printers ====
for my HP printer:
<code> sudo dnf install hplip-gui system-config-printer </code>
hplip-gui seems to be necessary to allow Xsane to detect the scanner (USB pluged).

==== Email / Calendar / Adress book ====
I wanted to have clients for emails, calendar (calDAV) and address-book (cardDAV). It must not be a all-in-one solution.\\
The only not-too-bad solution I found is called "Evolution". It can natively do all these jobs without any plugin.
<code> sudo dnf remove claws-mail
sudo dnf install evolution </code>
==== Installation of ownCloud ====
<code> sudo dnf install owncloud-client </code>

===== Enable backups by BackupPC of the SME =====
Source: [[http://geekeries.de-labrusse.fr/?p=2586]]\\
To make backups possible, the user "backuppc" of the SME must be able to connect via ssh to this client Fedora without entering any password.
Therefore the user "backuppc" must have a private ssh-key without passphrase and the public key must be send to the client Fedora.\\
On the SME-server: <code>
u -s /bin/bash backuppc                                                   # to login with the user backuppc 
ssh-keygen -t rsa -b 2048                                                 # without passphrase
ssh-copy-id -i ~backuppc/.ssh/id_rsa.pub root@ip_of_the_client_Fedora     # to send the public key

## Test: ##
ssh -l root@ip_of_the_client_Fedora                                       # a connexion without entering password should be working
exit                                                                      # to close the connexion to fedora
exit                                                                      # to logout the user backuppc </code>

===== Upgrading Fedora22 --> Fedora23 =====
  *ownCloud has to be removed, as well as the corresponding repo  <code>
sudo rm /etc/yum.repos.d/isv\:ownCloud\:desktop.repo </code>

  *proceed the upgrade:<code>
dnf install dnf-plugin-system-upgrade
dnf system-upgrade download --releasever=23
dnf system-upgrade reboot </code>
  *reinstall the client owncloud (present in the repos of Fedora now)
  *modify the ssh copnfig to allow connection from the SME: [[Welcome:Duo client-server:Connection SSH Fedora 22 - SME|Connection SSH of the Fedora 22 from the SME]]


===== Keyring =====
per default, the gnome-keyring is not unlocked at the login and its password has to be entered by hand for each login.

Solution: ????? [[http://www.nurdletech.com/linux-notes/agents/keyring.html]]
Wiki-GuedeL

Outils pour utilisateurs

Outils du site

Outils de la page
